Showing posts with label ASR Hip Replacement System. Show all posts
Showing posts with label ASR Hip Replacement System. Show all posts

September 2, 2012

Miss the Filing Deadline for Your DePuy ASR Hip Case? There May Still Be Hope



Despite the fact that the August, 2010 recall of the DePuy ASR metal-on-metal hip implant caused a significant stir among the medical community, thousands of recipients of the metal implant remained unaware of recall and subsequent warnings. Due to the initial FDA notice which was issued July 17, 2010 and the recall of the implant on August 24, 2010, all those who live in a state which operates under a two-year statute of limitations may have already lost their right to file suit against DePuy and Johnson and Johnson. Over half of the states do operate under that two year SOL, while others extend that time limit to three, four, six or even ten years. A handful of states have a one-year statute of limitations.  If you are the recipient of a DePuy metal hip implant it’s important that you determine your state’s statute of limitations for defective medical products even if you are currently having no problems with your implant.

Although DePuy originally set their metal implant’s failure rate at approximately 5%, they increased that number to 12% at the time of the 2010 recall. Independent studies place the likelihood of a DePuy ASR implant failure much higher—50% at five years following implant surgery and 80% at eight years following implant surgery. Statistically speaking, even those patients who have not yet experienced failure of their hip implant or adverse health effects from metal toxicity will do so in the very near future. It is extremely important that all DePuy ASR implant recipients at least be aware of their options prior to the date the statute of limitations will run.

July 29, 2012

Attorneys of Sullo & Sullo Seeing DePuy Hip Implant Lawsuits Increasing


While many other firms have seen a drop in the number of metal hip implant clients, Sullo and Sullo attorneys have actually seen those numbers climb. Andrew Sullo, Class Action Lead Counsel & Managing Partner notes that “Although many firms have noticed a slowdown in the number of clients hiring them for DePuy ASR and Pinnacle lawsuits, our firm has not. I believe that is because we are constantly offering our clients new and updated information. Our job is to inform all metal-on-metal hip recipients that even though their hip may not have failed yet, it could and after August 26th they may lose rights to recover compensation from Johnson and Johnson.”

With the statute of limitations coming up soon on the ASR metal-on-metal hip implant lawsuits, Sullo & Sullo is experiencing an increase in the ASR recipients who are coming forward and asking to be a part of the lawsuit. Many clients in the lawsuit have experienced adverse health effects as a direct result of having an ASR all metal hip implant put into their body.  On the other hand, many have experienced little or no pain with their ASR hip implant but have elected to join the lawsuit that they can be financial protected at a point in the future should their ASR device fail. Through no fault of their own, these people have become victims of a heavily flawed system which allows harmful medical devices to be sold to the public. The ASR was approved in 2005 by the FDA under the controversial 510(k) process which allows medical devices to essentially ride in on the coattails of other medical devices which have come before them. In some cases approval is granted based on a device which has actually been discontinued because of the number of problems associated with it.

April 5, 2012

The surgeon recommended a DePuy hip implant to his patient thinking the device was fully tested by the FDA for safety. He was wrong.

By Taylor Lindstrom

A 30-year-old man needs a hip replacement. His surgeon recommends a DePuy ASR XL Acetabular system because its metal-on-metal design is more durable and allows for a more active life. Following the doctor's recommendations, the young man gets the DePuy hip implant.
Then the hip implant fails. The young man is in extraordinary pain. His revision surgery reveals dead tissue and deteriorated bone, making it extremely difficult for his new implant to take hold. He takes a blood test that reveals extremely elevated levels of cobalt and chromium. He is now hypersensitive to metal and the surgeon warns him he may contract early-onset osteolysis.
The young man blames the surgeon for recommending the ASR XL Acetabular system in the first place? But the surgeon isn't the culprit in this scenario; he made the best recommendation he could for his patient. The surgeon is simply another victim of the real culprit: an FDA approval loophole called "substantial equivalence." 

A surgeon has countless medical devices to choose from. In the world of hip implants, he's looking at numerous options. The surgeon naturally wants to give his patients the best implant possible for their situation, so he chooses only FDA-approved devices that have been rigorously tested for safety.
Or so he thinks. 

Does an FDA Endorsement Guarantee Hip Implants' Safety?
The FDA has two processes for approving a new medical device: the premarket approval process,, and the premarket notification approval process. Similar as their names are, there is a world of difference between those two processes.
In the case of the patients who received an ASR XL Acetabular system, it may have been the difference between an improved quality of life with a working hip implant - or a drastically reduced quality of life with a faulty one. 

The premarket notification process is also known as the 510(k) process, and it includes the loophole of "substantial equivalence." The 510(k) process allows a product to go directly to market without full clinical testing if the manufacturer claims the medical device is "substantially equivalent" to another device already on the market.
According to FDA documents, a substantially equivalent product is one that is created for the same intended use as the previously approved products; has the same design, materials and technology; and raises no new concerns about safety or effectiveness.
Substantial equivalence was designed to prevent the 2-3 year waiting period for testing. If one hip implant is so similar to another device that it could be expected to get the same test results, what was the point of testing it?
One might argue "safety," but one would be naive to do so. Medical device companies pushed for the substantial equivalence loophole for an entirely different and far less altrustic reason: profits. Every year spent in testing is a year that hip implant isn't on the market earning money for the company.
A Pyramid Built on Sand
For Johnson & Johnson and its subsidiary DePuy, the priority was on products, not patients. They claimed the ASR XL Acetabular System was "substantially equivalent" to no less than three other devices already on the market that had been tested for safety.
Every part of that statement would prove to be inaccurate.
Companies are allowed to claim that their new product is substantially equivalent to more than one other product. For example, since they have to show that they have the same materials and technology as a previously approved product, a company might show that they used the same materials as one product and the same technology as another.
For the ASR XL Acetabular system's 510(k) application, DePuy cited three different previously approved products saying that the ASR system was "substantially equivalent"-at least in part-to all three.
By this argument, you could get a safety approval from the FDA for a flying car with submarine without ever testing it - after all, it is "substantially equivalent" - at least in part - to an airplane, a car, and a submarine. What on earth would be the point in testing it again when the basic principles have already been proven safe? 

The loophole gets even more absurd: companies are allowed to base their claims of "substantial equivalence" on products that were approved under the same 510(k) process.
One of the devices DuPuy used was approved with one device-that had been approved through another device-that had been approved through a third device-that was approved because it was substantially equivalent to a product grandfathered into the system prior to 1976. 

Essentially, DePuy was claiming that their product was substantially equivalent to hip replacements manufactured before the FDA was ever in place
 
Not a single hip implant in this chain of FDA was ever subjected to clinical trials before it was allowed to go to market. Even if it had been, it seems laughable that a hip implant "substantially equivalent" to a series of pre-1976 implant could ever make it through the FDA. Has technology developed so slowly that the best implants on the market are based on designs from 40 years ago?
Put it into perspective: the ASR XL Acetabular system was marketed to younger people who needed a longer-lasting, more durable hip replacement. That means many of the recipients got a hip implant based on a design older than they were.
Only 10% of applications submitted under the 510(k) process are ever returned with a request for clinical trials. That means that 90% of the Class III hip implants available today were never tested in a clinical setting before being marketed to the public. 

The DePuy ASR XL Acetabular hip replacement system was FDA approved - which might be more cause for worry than relief.

By Lacy Boggs

Since 1976, all medical devices must be classified and approved by the U.S. Food and Drug Administration (FDA) before they can be legally marketed to the public. It is the fond belief of many Americans that FDA approval is a ringing endorsement of a product's safety, a guarantee that the device has been tested and re-tested by professionals who are presumably trained to put the device through all kinds of rigor to triple-check its safety and effectiveness before allowing it anywhere near our fragile human bodies.
It is, as we say, a fond belief, but not an accurate one. It seems that many medical devices - including the recently recalled DePuy ASR XL Acetabular System - are given an FDA approval and subsequently placed inside people's bodies without ever going through a single test at the FDA. 

The FDA department responsible for the regulation and review of medical devices is the Center for Devices and Radiological Health (CDRH). CDRH divides medical devices into three classes: life-sustaining, life-supporting or implantable devices are designated as Class III.
Hip replacements, including the ASR XL system, qualify as a Class III device and are considered high risk to the patient's health. 

Class III devices can be approved by the FDA through one of two processes. The first, the premarket approval process (PMA) is more or less what we think of when we imagine our device being tested by the FDA: an extensive review including rigorous clinical trials that show it to be safe for use in humans. The PMA is quite detailed, lengthy, and expensive, usually costing the manufacturing company upwards of $250,000 and taking as much as two years to complete.
A quarter of a million is a large chunk of change - but thankfully for companies with a firm eye on their bottom line, there's always the second FDA approval process.
The premarket notification approval process, also known as the 510(k) approval process, is a sort of shortcut to approval that lowers the price point considerably - and also, conveniently, doesn't involve any pesky testing that might reveal a flaw in the product that would then have to be revamped and retested for another quarter-million. 

The 510(k) process basically pre-approves any product that is deemed "substantially equivalent" to another product already legally approved for sale. It costs less than $5,000, requires no clinical trials, and only takes an average of 3-6 months to complete. It's a good shortcut for products that are essentially identical to their forebears. After all, it hardly makes sense to waste the FDA's time when they could be helping get new, innovative, life-saving products to market. But what's to stop companies from claiming their products are "substantially equivalent" to other FDA-approved devices even if they're not remotely the same?
What, indeed
The ASR XL Acetabular hip replacement system got its seal of approval from the FDA using the 510(k) process, claiming that its product was substantially equivalent to other hip replacement devices already on the market. The FDA official in charge of approving the device would have gone through a checklist that included the following questions (simplified; the actual document is fairly dense):
  • Does the new product treat or solve the same problems as previously approved products?
  • Does the new product have the same design, materials, and energy sources as previously approved products?
  • Could any new characteristics or combinations of characteristics affect safety or effectiveness? 

January 26, 2011

Combating Chromium and Cobalt Blood Toxicity After An ASR Hip Replacement

Megan Breckenridge, Staff Writer
By Megan Breckenridge, Staff Writer
SULLO & SULLO, LLP
HOUSTON > If you are one of more than 93,000 people worldwide affected by the recent recall of DuPuy, Inc.’s ASR Hip Replacement System, you may be in more danger than you realize. Countless patients have already come forward with horrific stories of pain and suffering as a result of the defective devices; the most common of which are related to metal poisoning, or metallosis, which is a reaction to the chromium and cobalt metal debris that is shed when components of the device rub together.
If you have experienced symptoms of chromium and cobalt toxicity, which include pain, inflammation, tumors and difficulty walking, it is imperative that you seek medical attention immediately. Specialized blood tests can be used to detect levels of these toxic metals in ASR Hip Replacement patients. In some cases, patients with DePuy ASR implants have been found with 100 times the normal levels chromium and cobalt in their bodies.
One method of treating ASR Hip Replacement patients with high levels of chromium and cobalt in their blood is chelation therapy. The process involves the administration of chelating agents—the most common of which is ethylenediaminetetraacetic acid (EDTA)—to remove the poisonous metals from the body.
Chelating agents may be administered intravenously, intramuscularly, or orally, depending on the agent and the type of poisoning. They bind to heavy metals in the body and prevent them from binding to other agents, creating a compound that can then be excreted from the body.
For many patients, intravenous Vitamin C and replacement mineral infusions are also recommended to support the body through the metal removal process. Symptoms will often begin to improve within weeks of commencing treatment, but some may linger, indicating residual organ damage. Therapy may last as long as six months to two years.